How to 3D Print a Custom Fantasy Sports Trophy in 2026

A fantasy season ends with a champion, but a generic trophy can feel disconnected from the league's actual history. 3D printing lets you build a trophy that reflects your league's winners, and the free files and PETG options available in 2026 make this a manageable weekend project. This guide covers a modular trophy file, orientation and finishing techniques, filament choices, and engraving the names and results that decided your season.

A modular trophy that grows with the league

LukePilk's Modular Fantasy Football Trophy System, released on MakerWorld on January 5, 2024, is built to expand as a league survives year after year. Each winner level holds four winners, so a league adds a new level every four years. The designer's third level was added this year, and the design carries the same idea through successive champions. The base print profile uses a 0.16 mm layer height, two walls, and 15 percent infill, and it takes about 20.5 hours across five plates. A companion nameplate file with editable text comes in extra fine detail at 29.9 hours over six plates, or in 0.2 mm layers at 26.8 hours over six plates. That file is where personalized engravings fit without reworking the whole model.

Orient and split to protect the surface

Sovol3D's June 12, 2026 guide to World Cup 3D prints identifies the same failure modes that appear on fantasy trophies: wobbly tall prints, support scars, ugly seams, and paint that highlights layer lines. Its recommended approach is to choose an orientation that protects the front surfaces, minimize supports by splitting parts, and finish with a simple sand, prime, and paint workflow. For a trophy, print the base as one part and the cup or top as another, then assemble where the geometry already changes. The guide also advises checking that the file is watertight before slicing, because non-solid models can fail mid-print.

Choose PETG for a handled trophy

PETG is a practical choice for a trophy that will be passed around or displayed, because Intagly's maker network uses PETG for functional parts that get handled, warm up slightly, or get screwed together. In Intagly's October 2026 comparison, OVERTURE PETG is the spool its makers reorder most, with a ±0.02 mm diameter tolerance, a 230 to 260 °C nozzle range, a 65 to 70 °C bed, and a 30 to 300 mm/s speed rating. SUNLU PETG is the pick when stringing is the main problem, also with a ±0.02 mm tolerance. ELEGOO Rapid PETG is rated up to 600 mm/s for fast printers. Intagly's note about food contact is not needed for a trophy, but if the part were ever to touch food, the guide says to use a certified food-grade PETG rather than a regular spool.

Engrave winners and historical race data

The editable nameplate on the MakerWorld file is where a custom trophy becomes a season record. For standard fantasy football, you can add the league name, season, and winner. For harness-racing fantasy leagues, historical results give the exact horse and driver names that decided a round. The Swedish-language V64 Resultat site publishes winning horses and drivers for each leg of past V64 rounds, along with payouts, so you can engrave a specific winning combination. The most recent round shown there, October 11, 2026 at Övrevoll, lists six winners: Charlie Nosto with Oliver Wilson, Ides of March with Carlos Lopez, Lady Irene with Carlos Lopez, Captain Chorus with Lorenzo Putzulu, Coachella with Nathalie Mortensen, and Stogas Athena with Evelina Rönnlund. You can use those names on the plate, or engrave just the numbers for a cleaner, laurel-style look.

A practical build order for your league

Start with the modular trophy and nameplate files. Print the base at 0.16 mm layers, two walls, and 15 percent infill, and split the cup from the base if you want to avoid support marks. Use OVERTURE PETG at 230 to 260 °C nozzle and 65 to 70 °C bed, or SUNLU PETG if stringing appears. After printing, sand the visible surfaces, prime them, and paint if you want a two-tone finish. Add the engraved nameplate with the editable text, and the trophy is ready to be handed to the next champion. Because the design is modular, you can add another level when your league reaches its next four-year milestone.